YASLA glass fibre silos - the new standard for storage

YASLA silos are advanced solutions for the storage of animal feed, grain and other bulk materials, based on the many years of experience of IBT GmbH.

Why choose YASLA silos

High-quality materials and technologies

Durability and resistance to environmental influences

Easy to install and maintain

We strive to maximise the protection and preservation of your feed. That's why our silos have the thickest shell on the market. Together with the low thermal conductivity of GRP, this prevents condensation from forming on the inner walls, which helps to preserve the quality of the feed as it does not stick to the walls and does not overheat. The result is a high quality feed that retains all its nutritional properties and promotes better growth and development of the animals.
The tightness of YASLA silos prevents rodents and other pests from getting inside. This prevents spoilage and minimises your losses.
A GRP silo has far fewer seams on the shell than its metal counterparts. This almost completely reduces the risk of moisture penetrating the silo. The fibreglass silo shell only has vertical seams, which can be easily sealed during installation or if required.
The inner surfaces of the YASLA silo are coated with a thick layer of paraffin, which prevents the feed from sticking to the inner surfaces. The outer surface of the silo is provided with a durable layer of a special coating that protects the material of the silo shell from moisture and sunlight for many years. The white colour of this protective layer also helps to reduce the heating of both the silo shell and the feed.
Unlike metal silos, YASLA silos can be successfully installed outdoors. The glass fibre used for the silo shell has a considerable thickness which, together with its low thermal conductivity, prevents condensation on the inner surface. It is known that condensation on the inside of metal silos causes the feed to become wet. Sticking of the feed to the inner surfaces of the silos makes the operation of metal silos considerably more difficult.

Application areas

Animal husbandry

Agriculture

Industrie

Available models

The Yasla silo consists of a fibreglass tank and metal supports that have flanges with holes in the floor to secure the silo to the foundation with anchors. One of the silo supports is equipped with a special connection and can be used for pneumatic feeding.

Only our models have a reinforced flange for the vertical segment connection, which is fastened with heavy-duty, hot-dip galvanised fittings for maximum stability and reliability.
The steel silo supports are welded in our factory in accordance with EN 1090 and coated with a thick layer of hot-dip galvanised zinc, guaranteeing you many years of reliable operation.
The Yasla silo can be loaded through the large upper inlet with a diameter of 860 mm. The upper opening is securely closed by a rubber-sealed lid.
Loading can also be carried out pneumatically via a loading carrier that has a special device for connecting the pneumatic line from the feed wagon. The excess air is then discharged from the silo shell via a special venting support.